My current range of models

The K1

 

The K1 - or "Kasé 1" model is the first folder design in my lineup. Aside from the water jet cut handle scales, each and every K1 knife is hand made in Switzerland by myself. The K1 is available both as a right and left hand version (depicted on the picture is the left hand version.) Available steels are listed under the steels section of my website and all are available for this model with the exception of CPM Rex121. (For CPM Rex 121 there will be a dedicated model.) The blade runs on 13 ceramic, phosphorus bronze caged bearings which themselves each run inbetween a 62HRC hard steel washer on the handle scale side and the blade. The detent ball is also ceramic. The lock face is carbidized and engages the lock bar at an 7.9 to 8° angle. In order to handle the high hardness blade for several lifetimes, the through hardened stop pin is not only almost as hard as the individual blade steel being used, it can also be rotated 8 times should it ever start to wear. The pivot is made out of stainless steel and hardened to 62HRC. Next to the high quality hardware, what sets these folders truly apart is the usage of the exotic steels and custom heat treat for the blade and the very high hardnesses of up to 68+ HRC / Rockwell C without the blade becomingbrittle. For a demonstration of the toughness of a 68HRC hard blade, watch this video on my Youtube channel: https://www.youtube.com/watch?v=zSL1iVeyp4U

 

Additional information:

The bearings come pre lubed with teflon based dry lubricant. Dry lubricant doesn't attract dust or other forms of dirt like the commonly used oil based lubricants do and is just as effective.

Disassembly (if ever needed) is easy and of course doesn't void the life long, transfareable warranty.

(Damages done by improper disassembly like stripping of screws due to improper screw driver size etc. aren't covered by the warranty. In this case, repair fees would be due. The same goes for any kind of damages caused by modifications.)

 

Price: 950 to 1250 USD depending on steel type, including shipping world wide, with tracking, insurance to full value, signature required on delivery, priority 5-7 days shipping time.


Shard

 

My top selling model, the "Shard" is your ideal companion to carry everyday. The knife can be carried comfortably and discreetly inside your waistband and will be invisible even when wearing tight clothing. The included kydex sheath is designed so that the edge will never come in contact with the sheath. The blade length is approximately 8  centimeters, the blade width about 38millimeters. The blade thickness varies depending on steel type. Most of them are 3.5 or 3.8 millimeters in thickness. The grind a full flat grind with either 0.3  or 0.4 millimeters behind the edge - depending on steel type and application. Sometimes you will see me offer "extra slicey" Shards with a behind the edge thickness of only 0.1 millimeters.

 

Watch my presentation video here:

https://www.youtube.com/watch?v=IBJ_UBUXM2Y

 

Price: Starting at 500 USD depending on steel type, including shipping world wide, with tracking, insurance to full value, signature required on delivery, priority 5-7 days shipping time.


Slim Shard

 

This is a slimmer version of my Shard model. The blade width is about a third less.

 

Price: Starting at 500 USD depending on steel type, including shipping world wide, with tracking, insurance to full value, signature required on delivery, priority 5-7 days shipping time.


Bushcrafter

 

 

Being an hommage to the classic "Woodlore" knife, this bushcraft knife features a TRUE zero scandi grind, meaning that there is no micro bevel. The 13 degrees per side bevels are also truly flat, so that sharpening on stones is easy and convenient and really fast. My steel of choice for this model is Z-Wear PM steel at 62 Rockwell, which offers an incredible combination of toughness and wear resistance. Thanks to my wet grinding process, which I explain here, you will type probably also find that this scandi edge will handle a lot more stress than many people think, as it has not been overheated.

Comes with dangler style leather sheath.

 

Quick demonstration video:

https://www.youtube.com/watch?v=QFo50gyvZEc

 

In terms of edge toughness at over 60 Rockwell, I made this video:

https://www.youtube.com/watch?v=Z-2861dtYus

 

Price: Starting at 550 USD depending on steel type, including shipping world wide, with tracking, insurance to full value, signature required on delivery, priority 5-7 days shipping time.


Bushcraft Hunter

 

A knife that is excellent for both bushcrafting and hunting - your ideal companion for the outdoors! Being an avid bushcrafter and outdoorsman myself, it was only natural for me to develop a knife like this as my very first fixed blade knife design.

Comes with leather sheath.

 

Price: Starting at 550 USD depending on steel type, including shipping world wide, with tracking, insurance to full value, signature required on delivery, priority 5-7 days shipping time.